EFFECT OF THE RIBLETS SURFACE ON THE BOUNDARY LAYER DEVELOPMENT

ＥＦＦＥＣＴ　ＯＦ　ＴＨＥ　ＲＩＢＬＥＴＳ　ＳＵＲＦＡＣＥ　ＯＮ　ＴＨＥ　ＢＯＵＮＤＡＲＹ　ＬＡＹＥＲ　ＤＥＶＥＬＯＰＭＥＮＴＷａｎｇＪｉｎｊｕｎ；ＬａｎＳｈｉｌｏｎｇ；ＬｉａｎＱｉｘｉａｎｇ（ＩｎｓｔｉｔｕｔｅｏｆＦｌｕｉｄＭｅｃｈａｎｉｃｓＩＢｅ...     

A Novel Onboard-gateway-based Mechanism to Improve TCP Performance in Aeronautical Satellite Networks

The IP-based networks on aircraft serve to support Internet services via satellites. However, in aeronautical satellite hybrid net- works,the TCP protocol performance often deteriorates due to improper decreases and slow recovery of the congestion window. This paper proposes a window size determination and notification mechanism, onboard-gateway-based mechanism (OGBM), which is based on the onboard gateway in the networks on aircraft. A cross-layer approach is adopted by the onboard gateway to obtain the satellite link bandwidth information. And then, by the gateway, through changing the receiver’s advertised window field in ACK packets, TCP sources are notified of the window size of each TCP source calculated on the ground of bandwidth delay product and flow numbers. The mechanism is able to avoid improper changes of TCP window and serve multiple users. Simulation results show that the mechanism with the fairness index close to 1 improves TCP performance in aeronautical satellite networks.     

空间能量粒子探测方法研究

阐述了空间能量粒子探测的原理和方法。介绍了国外在能量粒子探测方面所采用的半导体望远镜测量法、电场加速法、磁偏转法等方法，分析了它们各自的优缺点。就制约能量粒子探测技术发展的关键因素进行了讨论。并以此为基础，结合我国实际情况提出了一种新的探测方法。     

Space-Wise,Time-Wise,Torus and Rosborough Representations in Gravity Field Modelling

The decade of the geopotentials started July 2000 with the launch of the German high-low SST mission CHAMP. Together with the joint NASA-DLR low-low SST mission GRACE and the ESA gradiometry mission GOCE an unprecedented wealth of geopotential data becomes available over the next few years. Due to the sheer number of unknown gravity field parameters (up to 100 000) and of observations (millions), especially the latter two missions are highly demanding in terms of computational requirements. In this paper several modelling strategies are presented that are based on a semi-analytical approach. In this approach the set of normal equations becomes block-diagonal with maximum block-sizes smaller than the spherical harmonic degree of resolution. The block-diagonality leads to a rapid and powerful gravity field analysis tool. Beyond the more-or-less conventional space-wise and time-wise formulations, the torus approach and Rosborough's representation are discussed. A trade-off between pros and cons of each of the modelling strategies will be given. This revised version was published online in August 2006 with corrections to the Cover Date.     

死亡是生命的必然归宿

本文根据物质系统演化的规律，平衡原理及熵理论，阐述了死亡是生命系统演化的必然归宿。     

滑阀稳态液动力的计算和分析

以液氧/煤油补燃循环火箭发动机中流量调节器中滑阀为例,介绍了滑阀稳态液动力的一种计算方法,分析了不同结构参数下稳态液动力的变化规律,得出了滑阀的稳态液动力与滑阀位移、液流出口处的流道形状以及刃边厚度关系的一些初步结论。     

TC11钛合金的热态变形行为研究

采用等温恒应变速率压缩试验法,研究了TC11合金在780℃-1080℃和应变速率为0.001s-1~70s-1范围内的高温压缩变形行为。考察了变形温度、应变速率及变形程度对流动应力的影响关系。结果表明,流动应力对变形温度和应变速率敏感,随变形温度升高和应变速率降低流动应力减小,特别是在α β两相区变形温度对流动应力的影响显著。     

马蹄涡结构的显示

对层流角区流动的动态流动模式进行了流动可视化实验研究.实验采用了脉冲氢泡发生器和录像系统对流场进行了显示和研究.通过实验发现,氢泡丝的布置是清晰显示角区流动的精细结构的重要因素.实验雷诺数范围为Reδ*=2.74×102～3.19×102.该实验的角区流动由在平板表面的长方形突起物产生.实验结果显示了主马蹄涡和反向二次涡的流动结构和流动过程.实验还发现了一系列新的流动现象,如马蹄涡的头部形成区域的流动过程及其在柱体上游形成"肩膀"的现象等.     

铝合金冷挤压工艺的优化

本文介绍了6A02、6063铝合金冷挤压试验过程。通过专门装置测试铝合金冷挤压中不同凹模表面粗糙度、挤压速度、润滑剂、坯料状态的下的挤压力,利用正交试验L9(34)得出最优工艺参数。结果表明冷挤压过程中模具表面并非越光越有利于成形,坯料也要针对不同的挤压材料应选用不同的热处理方法。本实验为铝合金冷挤压提供了可行的实验方法和生产依据。     

铝合金定向凝固过程枝晶生长的相场法模拟

本文基于Wang等人提出的熵函数公式。在假定平衡时同液界面处固、液相的化学势相同而溶质浓度不同的基础上。推导了一个新的二元合金相场模型。并利用该相场模型与溶质场进行耦合计算，以Al-4．5％Cu合金为例模拟了二元台金等温凝固定向凝固的枝晶生长过程。研究了在正温度梯度情况下二元合金过冷熔体中的等轴枝品和柱状晶的生长过程及其溶质场的分布情况。